ADDER ADDERLink XDIP

SPHINX in Europe
NL
  • AT
  • BE
  • DK
  • FR
  • DE
  • IE
  • IT
  • NL
  • ES
  • SE
  • CH
  • UK
Productgroepen > KVM over IP > ADDER ADDERLink XDIP

ADDER ADDERLink XDIP

Fanless, small form factor, HDMI, USB and Audio Extender, Switch or Matrix

ADDER ADDERLink XDIP
5283_27005.png
5283_27006.png
5283_27007.png
5283_27008.png
5283_27009.png
5283_27010.png
5283_27011.png
5283_27012.png
5283_27013.jpg
  • EigenschappenEigenschappen
  • BeschrijvingBeschrijving
  • Verdere informatieVerdere informatie
  • PDFPDF
  • Uses IP technology over standard CATx network cable
  • Point-to-point, switching, sharing or small matrix operation
  • Local USB and video feed through ports
  • PoE models are powered by PoE or an optional external PSU
  • USB2.0 (low & full speed) for keyboard, mouse, tablet and touch screen
  • Analog audio with headphone support
  • Standard IP network
  • SUN compatible
  • PC compatible
  • Mac compatible
  • DVI interface
  • HDMI interface
  • USB interface
  • RJ45 interface
  • Audio connectivity
  • HD-KVM Full 1080p
  • 24 bit colour

Digital video extender, switch or matrix with USB and audio over IP via 1GbE network

The AdderLink XDIP is a compact, easy to install, fanless matrix solution that runs on a standard IP network and enables users to extend and manage their computers with ultra-low latency, HD video and stereo audio. The XDIP is scalable, from simple extension to small matrix. It is very well suited to small and medium sized installations.


Configurable units
    The XDIP user and computer units are the same and assigned a role at set up. They can transmit/receive up to 1920x1200 video, stereo analog audio and USB2.0 over a single twisted pair network cable.


High quality video, real time control
    XDIP implements low latency, high quality, 60Hz video compression to deliver an “at the computer” user experience over a standard Gigabit LAN.


CATx cable for connection
    Video, USB2.0 and audio all pass along a single minimum spec of CAT5e cable allowing use of existing infrastructure cables in the building and an immediate ROI. Distance is linked to the IP standard of 100m with a 40% overhead for safety. Longer distances are achieved by routing through your IP infrastructure.


Feed through and local computer support
    Video and USB feed through ports are available. These enable a local console at the source computer. A local computer is also supported at the user station.


One solution, many uses
    XDIP nodes can be configured as a simple extender, distributed KVM switch or KVM sharer or any combination up to 8 computers and 8 users (each user does not necessarily need to be connected to the same 8 computers).


EDID management
    The extender has intelligent EDID management to allow the true characteristics of the monitor to be passed back to the computer or alternatively, a fixed EDID can be specified.


Plug and Play
    There is no need for drivers or software to be installed. A simple wizard takes you through setup at the start of life of the product.


CD-quality analog audio
    CD-quality stereo audio (16-bit sampling at 48kHz) is passed between the local and remote units. Headphones are also supported (up to 32 Ohms impedance).


ProdGrafik

Industries

    Ideal for Audio Visual industry
    Ideal for Banking industry
    Ideal for Broadcast industry
    Ideal for Command & Control industry
    Ideal for Data Centre industry
    Ideal for Government/Federal industry



Hardware compatibility
    All computers with HDMI, USB and analogue audio. Can be interfaced to VGA, DVI and DisplayPort with appropriate adaptors


Video Resolution
    The system supports resolutions to a maximum of 1920 x 1200 @ 60Hz


USB 2.0
    Supports USB2.0 HID devices (keyboard, mouse, tablet and touch)


Software compatibility
    All known operating systems. No drivers required


Computer connections
    HDMI, Audio 3.5mm, USB type B, 8p8c Ethernet port


Console connections
    HDMI, Ethernet, 3 x USB type A, Audio 3.5mm


Power connections
    POE 802.3af via Ethernet port or 3 Pin Locking DC jack (Optional: 100-240VAC 50/60Hz, 0.7A, input to power adapter, 12VDC 18W output from power adapter)


Physical design
    Compact case, robust metal construction. 169mm/6.65” (w), 31mm/1.22” (h), 120mm/4.8” (d), 0.6kg/1.3lbs.


Operating temperature
    0 to 40ºC / 32 to 104ºF


Approvals
    CE, FCC


ORDERING INFORMATION

       XDIP-POE:    Single node POE powered or by optional 12V PSU
       XDIP-PSU:    Single node with 12V PSU, no POE
       XDIP-RED:    Single node with PSU cable for connection to RED-PSU
       XDIP-IEC:    Single POE node including external 12V PSU
       XDIP/P-XX:    Two nodes in a single box for point to point extenders


XX = Mains Lead Country Code:

UK = United Kingdom
EURO   = Europe



ADDITIONAL ACCESSORIES

    RMK8: 19” rack mount kit - 2 units/1U slot
    RMK10:   Wall/desk mount kit



WHAT’S IN THE BOX

  • 1 x XDIP-POE
  • 1 x 2 meter HDMI cable
  • 1 x 2 meter USB A to B cable
  • 1 x 2 meter 3.5mm jack audio cable
  • 1 x quick start guide


Optional:

  • PSU-IEC-12VDC-1.5A 18W PSU
  • USC48 - 2 Meter power lead for RED-PSU


Klanten keken ook naar deze producten
Accept all Reject Configure

This website uses cookies to provide the best possible experience. More information.