NetModule NB1600 WLAN

SPHINX in Europe
NL
  • AT
  • BE
  • DK
  • FR
  • DE
  • IE
  • IT
  • NL
  • ES
  • SE
  • CH
  • UK
Productgroepen > Access Points > NetModule NB1600 WLAN

NetModule NB1600 WLAN

Product is End of Life : 2019-07-12
WLAN access point, wlan client

NetModule NB1600 WLAN
4416_23573.png
4416_9484.png
4416_13327.png
  • EigenschappenEigenschappen
  • BeschrijvingBeschrijving
  • Verdere informatieVerdere informatie
  • PDFPDF
  • WLAN access point or client
  • IEEE802.11 abgn 2.4/5 GHz
  • 2 Ethernet port
  • 2 digital inputs & outputs
  • USB & RS-232
  • Redundant power supply
  • DIN Rail mounting kit
  • Programmability

The NB1600-WLAN can be configured as WLAN access point or as wlan client.

In addition all NB1600 core functions are available: digital I/O, USB and serial gateway, SDK, VPNs and many more.

The NB1600 WLAN router is an industrial grade access point with additional functions. The integrated WLAN card can be configured as access point or as client. In access point mode, the router can establish up to 4 different WLAN networks.

As a special highlight NB1600 offers two Ethernet ports that are highly configurable. Used as LAN ports they may form a 2 port switch or have two separated and routed IP networks. Used as WAN ports the NB1600 acts as an industrial firewall with VPN client functionality.

The RS-232 serial interface can be configured by software as system console or serial device server. Legacy equipment that does not have any Ethernet port can be hooked up this way.

The NB1600 has two isolated binary inputs and two relay outputs for direct connection of sensors and actuators.

The USB port enables configuration and firmware update from memory stick. Ask for support of your specific USB device.

NB1600 supports major VPN technologies such as IPsec and OpenVPN. Both, server and client mode is possible. Simple handling of a Public key infrastructure makes is easy to connect two NB1600 via trough a VPN tunnel.

Further services include DHCP server, DNS proxy server, DDNS agent, SNMP agent, telnet server, SSH server, web server, e-mail client and SMS client. The device is administrated via an easy to use web GUI or the command line interface. Over the air software update is both easy and fail-safe.


Typical Applications

    WLAN network with multiple access points
    WLAN client for WLAN disabled devices


ProdGrafik

WLAN / Wi-Fi
    IEEE 802.11abgn up to 300 Mbps 2.4/5GHz MIMO
    Access Point or Client
    Max users in access point mode: WPA: 54, WPA2: 110
    Antenna connector: SMA female, supporting one or two antennas


Digital I/O
    2 digital inputs, level 0 (not set): 0-4.0 VDC level 1 (set): 7.2-40 VDC
    2 digital outputs, 0-60 VDC/1A, maximum switching capacity: 60 W
    Connector: 8 pins of 15-pin terminal block


Ethernet
    2 Ethernet ports, 10/100 Mbps, Auto MDX, bridged or routed, RJ45


USB
    USB Host interface, type A


Serial
    Protocol: 3-wire RS232
    Connector type: 3 pins of 15-pin terminal block


Power
    Redundant power supply inputs
    Input voltage: 12V DC to 48V DC (-15% / +20%)
    Max. power consumption: 5W
    Connector type: 2+2 pins of 15-pin terminal block


Dimensions
    124.2mm x 45mm x 110mm, ca. 450g


Environment
    Temperature range: -25 °C to +70 °C
    Ingress Protection Rating: IP40; MTBF: 226´000h


Safety Standards
    EN60950-1:2006


EMC Standards
    EN301489-1 V1.7.1, EN301489-7 V1.3.1 (Emission)
    EN61000-6-2:2005, EN50121-3-2:2006 and EN50121-4:2006 (Immunity)


Type Approvals
    CE according to directive 1995/5/EC (R&TTE)
    FCC according to 47 CFR, Part 15



Order numbers:

    NB1600-W

      WLAN router, configurable as access point or client


Klanten keken ook naar deze producten
Accept all Reject Configure

This website uses cookies to provide the best possible experience. More information.