Opengear ACM7000-L Resilience Gateway

SPHINX in Europe
NL
  • AT
  • BE
  • DK
  • FR
  • DE
  • IE
  • IT
  • NL
  • ES
  • SE
  • CH
  • UK
Productgroepen > Gateways > Opengear ACM7000-L Resilience Gateway

Opengear ACM7000-L Resilience Gateway

Resilience Gateway with Smart OOB™ and Failover to Cellular™

Opengear ACM7000-L Resilience Gateway
4166_30048.png
4166_30049.png
4166_30050.png
4166_30051.png
4166_30052.png
4166_30053.png
4166_30054.png
  • EigenschappenEigenschappen
  • BeschrijvingBeschrijving
  • Verdere informatieVerdere informatie
  • PDFPDF
  • Smart OOB with Failover to Cellular
  • Maintain network connectivity during failures with IP Passthrough
  • Available with 4 port embedded switch
  • Flexibility with built-in 4 USB console ports
  • New highspeed global cellular modem - LTE-A Pro
  • Built-in digital I/O and high voltage I/O
  • Compact and powerful hardware with integrated 4 GB internal storage

The ACM7000-L Resilience Gateway ensures uptime at branch offices, retail stores, kiosks and other remote sites. Cellular access provides an always-on gateway to your off-site network devices, even when the primary network is down.

Identify and remediate issues at the network edge before they become failures with Smart OOB™. Maximize WAN resilience with Failover to Cellular™ to 4G LTE networks and built-in multicarrier capabilities.

  • 4-8 serial ports, out-of-band management of network and server devices
  • 4 x USB 2.0 console ports, out-of-band management of network and server devices
  • Automatically detect and recover from outages and repair equipment faults
  • Link Layer Discovery Protocol (LLDP) discover, identify and verify attached devices on your local network.



Smart OOB

Opengear’s solution raises secure remote access and infrastructure management to a new level. Smart OOB extends traditional out-of-band management to monitor and log systems health and environmental conditions, proactively detecting faults before they become failures.

  • Maintain complete control during infrastructure fault conditions and network outages with serial, Ethernet and USB console access to all the server, networking, and power infrastructure at the remote site
  • Proactively detect faults before they become failures
  • Automated response with customized rules and policies undertaking complex actions depending on what is detected
  • Rapid problem identification, quick notification and prompt response to system or network connectivity issues reduces MTBF
  • Sophisticated troubleshooting and remediation at the edge reduces MMTR and operating costs
  • Smart alert escalation through SNMP, email and direct SMS
  • Some models include built-in 3G/ 4G LTE cellular modem provides secure alternate path for trouble-shooting and repair
  • Bulletproof remote site management with 4-8 ports



Failover to Cellular™

Opengear smart automation capabilities alert operators and automatically restore site connectivity using high-speed 3G or 4G LTE cellular. Built on reliable IP Passthrough technology and integrates with your existing networking routers to ensure uninterrupted availability for remote networks over high-speed 4G LTE or 3G cellular networks when the router’s primary Internet connection fails.

  • Ensures WAN connectivity and continued business operations via failover to high speed cellular networks
  • Simple LAN-to-WAN IP Passthrough technology ensures easy interoperability with all major enterprise routers
  • Transparent, automatic failover and failback
  • Wireless 4G LTE offers speeds fast enough to keep the network running smoothly
  • Integrates seamlessly with existing IT systems and network infrastructure
  • Interoperability with all major enterprise routers
  • Embedded cellular module with multi-carrier capabilities enables selection of best carrier at each remote



Strong Security & Authentication

Efficiently and securely manage your network infrastructure with:

  • Lock down management interfaces with local and remote AAA including Active Directory, Kerberos, TACACS+ and RADIUS with RSA SecurID
  • Encrypt sensitive management traffic with IPsec and OpenVPN
  • Comprehensive logging features for compliance and audit trail
  • PCI DSS 3.2 compliance (Download PCI DSS 3.2 Best Practices Whitepaper)
  • FIPS 140-2 validated encryption for government and military applications
  • Single point of authentication and policy enforcement, monitor and log each management keystroke



USB Console Management

Opengear’s USB console management gives you added flexibility to connect to the next generation of USB console only devices.

  • USB provides an easy plug and play solution
  • Seamless USB console integration without additional software
  • Smart OOB for devices with USB only console ports
  • Eliminate proprietary cabling and setup
  • Support for a broader range of vendor equipment
  • Higher data transfer rates reduce downtime during firmware and configuration deployments
ProdGrafik

TECHNICAL SPECIFICATIONS

    Console Specifications

      Console Ports

      ACM7004-2-L – 4 x RJ45 RS-232 Cisco straight pinout console ports
      ACM7004-5-L – 4 x RJ45 RS-232 Cisco straight pinout console ports and 4 port embedded Gigabit Switch
      ACM7008-2-L – 8 x RJ45 RS-232 Cisco straight pinout console ports



    Interface

      Ethernet Ports

      ACM7004-2-L – 2 x 10/100/1000 Ethernet
      ACM7004-5-L – 4 x 10/100/1000 Ethernet Switch and 1 x 10/100/1000 Ethernet/SFP Uplink
      ACM7008-2-L – 2 x 10/100/1000 Ethernet
      All Ethernet/SFP Fiber port with 1500V AC Isolation and ESD Protection

      Serial Ports
      Cisco straight 50 to 230,400 bps

      USB Ports
      4 x USB 2.0 Console Ports

      Remote Access
      Integrated 4G LTE Cellular Card, Dual Ethernet, aggregation & redundancy, Automatic Network Failover, Easy browser UI, IPv6

      I/O Ports
      2 x TTL level Digital I/O ports (DIO) 5V DC max @ 20mA (supports external water /smoke / motion dry contact sensors)
      2 x High Voltage Digital Outputs (HVDO) 5-30V DC@ 100mA (drives relays, alarms, etc.)

      Console Management
      Built-in web terminal
      SSH direct to consoles
      Optional console keystroke logging
      Alert on cable disconnects, text pattern match and more
      Inline power control
      Multiple concurrent sessions



    Power Requirements

      Power Adapter
      110-240V AC to 12V DC external power adapter
      PSE Mark, BIS Mark

      Power Consumption
      Less than 11.5W



    Physical Dimensions

      Dimensions and Weight
      5 1/8 x 4 3/4 x 1 3/8 in – 1.3 lbs.,
      13 x 12 x 3.5 cm - 0.6 kg

      Form Factor
      Compact



    Memory & CPU

      CPU
      800 MHz Armada 370 ARMv7 SoC (Marvell 88F6W11)

      Memory
      256 MB DDR3 SDRAM
      32 MB Embedded NOR Flash

      Internal Storage
      4 GB NAND Flash



    Environmental

      Operating Temperature
      -25°C to 60°C, -13°F to 140°F

      Storage Temperature
      -40°C to +75°C, -40°F to +167°F

      Humidity
      5% to 90%

      Environmental Monitoring
      Internal temperature sensor and external serial EMD5000 device supports physical, smoke, water leak, vibration sensors

      MTBF
      100,000 Hours (Power Supply)



    Security, Encryption & Authentication

      SSH
      FIPS-140-2 compliant Open SSL Module
      Strong ciphers -AES encryption
      Cisco-compatible IPsec
      OpenVPN
      AAA – TACACS+, RADIUS, Active Directory/OpenLDAP, Kerberos, with local fallback
      Two-factor authentication via remote AAA
      Configurable stateful firewall
      Actively developed & support and security notifications-frequent firmware updates



    Automation & Scalability

      ZTP, Lighthouse
      RESTful API, programmable and extensible
      Auto-Response, SNMP, LLDP, NTP



    Cellular

      Modules
      Sierra Wireless EM7565
      Cat-12 600Mbps/150Mbps (Download/Upload)

      Cellular Certification
      AT&T and Verizon Certified
      MIC-R and MIC-T Certified Japanese carriers
      PTCRB, GCFKDDI/docomol/Softbank/Telstra (Coming Soon)



    Certifications

      Emissions
      EN 55022:2010, CISPR 22:2008, FCC Part 15 Subpart B:2015,
      ICES-003 Issue 5 (2014), AS/NZS CISPR 22:2009+A1:2010,
      EN 61000-3-2:2006/A2:2009, EN 61000-3-3:2008

      Immunity
      EN 55024:2010, CISPR 24:2010,
      EN 61000-4-2:2009, EN 61000-4-3:2006+A2:2010, EN 61000-4-4:2004+A1:2010,
      EN 61000-4-5:2006, EN 61000-4-6:2009, EN 61000-4-8:2010, EN 61000-4-11:2004

      Other Agency Approvals
      CE, UL 1950, TUV, C-Tick, RoHS compliant,
      Security features to support NERC CIP standards,
      FIPS 140-2 validated module Certificate #2473



Ordering Information
Available Models
Model Description
8 Port Resilience Gateways ACM7008-2-L 8 serial Cisco Straight pinout, ext power, 2 GbE Ethernet,
Global LTE-A Pro Cellular module, dual SIM, 2 DIO and 2 output ports.
(Verizon certification pending)
4 Port Resilience Gateways ACM7004-5-L 4 serial Cisco Straight pinout, ext power,
1 GbE Ethernet or fiber SFP & 4 port GbE switch,
Global LTE-A Pro Cellular module, dual SIM, 2 DIO and 2 output ports
ACM7004-2-L 4 serial Cisco Straight pinout, ext power, 2 GbE Ethernet,
Global LTE-A Pro Cellular module, dual SIM, 2 DIO and 2 output ports




Package Checklist

  • Resilience Gateway
  • External rack mount tab
  • Black terminal block
  • 2 x Blade antennas
  • DB9F-RJ45 adapter
  • 4 x Rubber feet
  • 12v Global Power Supply
  • Antenna Extension Kit
  • Quick Start Guide



Ordering Information
Available Models
Model Description
Adapters 319014 Adapter - DB9F to RJ45 straight serial - DCE -For X2 Pinout
319015 Adapter - DB9F to RJ45 crossover serial - DTE -For X2 Pinout
319016 Adapter - DB9M to RJ45 straight serial - DCE - For X2 Pinout
Environmental EMD5000-02 Environmental Monitoring Device – X2 Pinout
EMD5781-10 Door contact sensor – 10′ Cable length
EMD5782 Vibration sensor – 3′ Cable length
EMD5779-Q Smoke detector/alarm (220V AC, IEC C-13)
EMD5890-QA Smoke detector/alarm (110V AC, NEMA 5-15)
EMD5780 Water leak detector – 3′ Cable length
Mounting 590003 Rack Mount Kit - Ears and Screws - ACM7000
590012 DIN Rail - ACM7000
590033 Rack Mount Tray - All ACM Series
Power Supply SDC48-12V-4PIN Power Supply – External D/C 12v (36v to 72v)
450031 Power Supply – 12VDC Four Chamber Square Connector
450032 External AC 12V with IEC C13/C14 input
Wireless Accessories 569041 Antenna – Blade LTE-A Pro with swivel base (-L Devices)
449041 Antenna Extender - Magnetic Base with 10' Cable
569018 Antenna – GPS Active – 6′ Cable length – For all 4G LTE Cellular units
569028 Antenna - 5" Blade 4G LTE with swivel base (-LMx models)
590051 Antenna Extension Kit



Klanten keken ook naar deze producten
Accept all Reject Configure

This website uses cookies to provide the best possible experience. More information.